Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to store those parameters manually adjusted, which allows you to recall the setting for a specific computer.

1

Press the MENU button to display the On-Screen Menu.

 

Press the Point 7 8 buttons to move the red frame pointer

 

to the PC Adjust Menu icon.

2

Press the Point d button to move the red frame pointer to

 

the desired item and then press the SELECT button. The

PC Adjust Menu

PC Adjust Menu icon

adjustment dialog box will appear. Press the Point 7 8 buttons to adjust the value.

Fine sync

Eliminate a flicker from the image displayed. Press the Point 7 8 buttons to adjust the value. (From 0 to 31.)

Total dots

Adjust the number of total dots in one horizontal period. Press the Point 78 buttons to adjust the number to match your PC image.

Horizontal

Press the Point 7 8 buttons to adjust the horizontal picture position.

Vertical

Press the Point 78 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Adjust the clamp level. When the image has dark bars, try this adjustment.

Move the red frame pointer to an item and press the SELECT button.

Status of the

selected Mode

Selected Mode (Stored/Free)

Press the Point 78 buttons to adjust the value.

Press the SELECT button at this icon to adjust other items.

Current mode

Press the SELECT button at the Current mode icon to show the information of the connected computer.

Computer Input

27

Page 27
Image 27
Eiki LC-SD15 owner manual Manual PC Adjustment