Eiki LC-SD15 owner manual Video Input, Component, RGB Scart

Video Input

Input Source Selection

Direct Operation

Choose either Video or Computer by pressing the INPUT button on the top control or VIDEO or COMPUTER button on the remote control.

Before using these buttons, a correct input source should be selected through Menu Operation as described below.

Menu Operation

Top Control

		WARNING
POWER			LAMP
			REPLACE
			INPUT
ON - OFF
E	–		V
			O
M			L	MENU
U		SELECT	U
L			M
O
V			E
			+

Remote Control

Input Menu icon

Input Menu

INPUT button

Computer

Video

COMPUTER button

VIDEO button

1	Press the MENU button to display the On-Screen Menu.
	Press the Point 7 8 buttons to move the red frame pointer
	to the Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Video or Computer and then press the SELECT button. The
	Source Select Menu will appear. When selecting VIDEO,
	video input is selected. When selecting COMPUTER, go to
	Step 3 to select an input source.
3	Move the pointer to a correct input source and then press
	the SELECT button.
		When the input source is connected to the
S-Video
		COMPUTER / S-VIDEO / COMPONENT IN with
		a S-Video-VGA Cable, select S-Video.
		When the input source is coming from video
Component
		equipment connected to the COMPUTER /S-
		VIDEO / COMPONENT IN with a Component-
		VGA Cable, select Component.
		When the input source is coming from video
RGB (Scart)
		equipment connected to the COMPUTER / S-
		VIDEO / COMPONENT IN with a Scart-VGA
		Cable, select RGB (Scart).

✔Note:

•S-Video-VGA Cable, Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 57 for order.

Move the pointer (red arrow) to Computer and press the SELECT button.

Computer

Source Select Menu

Move the pointer to S-Video, Component, or RGB (Scart) and then press the SELECT button.

32