Setting

Logo PIN code lock

This function prevents an unauthorized person from changing the Logo setting.

Off . . . . . . . the Logo setting can be changed freely with the Logo function. (p40)

On . . . . . . . the Logo setting cannot be changed without the Logo PIN code.

If you want to change the Logo PIN code lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set "4321" at the factory.

Enter a Logo PIN code

Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number will change to "". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, and then return to "Logo PIN code". Enter the correct number.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can change the Logo PIN code lock setting.

If you enter a wrong Logo PIN code, "Logo PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a Logo PIN code all over again.

To Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Select "Logo PIN code change" with the Point d button and press the SELECT button. Set a new Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to the relevant instructions of the PIN code lock function on page 43.

Logo PIN code lock

Logo PIN code lock Dialog Box

After a correct Logo PIN code is entered, the following dialog box will appear.

Pointer

Select On/Off by pressing the Point 78 buttons or change the Logo PIN code.

Setting

39

Page 39
Image 39
Eiki LC-SD15 owner manual Setting, Logo PIN code lock, Enter a Logo PIN code, To Change the Logo PIN code