Eiki LC-SD15 Cleaning the Projection Lens, Cleaning the Projector Cabinet, Maintenance & Cleaning

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive cleaner for camera lens, or use lens cleaning paper or a commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

When the projector is not in use, replace the lens cover.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a dry soft cloth. When the cabinet is heavily soiled, apply a small amount of mild detergent and finish with a dry soft cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put it in an appropriate carrying case to protect it from dust and scratches.

Attaching the Lens Cover

When moving the projector or while it is not in use over an		1
extended period of time, replace the lens cover.
1	Thread the string through the hole on the lens cover and
	then tie a knot in the string to secure it in place.
2	Thread the other end of the string through the hole at the
	bottom of the projector. Then pass the lens cover through
	the resulting loop of the string. Tie a knot in the string to
		2
	secure it in place.

Maintenance and Cleaning

Maintenance & Cleaning

47