Appendix
Some displays are not seen during the operation.
– Check the Display item. (See page 38.)
PIN code dialog box appears at
set). (See pages 17 and 43.)
The Remote Control does not work.
–Check the batteries.
–Make sure there is no obstruction between the projector and remote control.
–Make sure you are not too far from the projector when using the remote control. The maximum operating range is 16.4’ (5m).
–Make sure the code of the remote control is conformed to that of the projector. (See page 42.)
–Unlock the Key lock for the remote control in the Setting Menu. (See page 42.)
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obtain service.
Appendix
The CE Mark is a Directive conformity mark of the European Community (EC).
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
51
