Basic Operation
Turning On the Projector
1 | Complete peripheral connections (with a computer, VCR, |
| etc.) before turning on the projector. |
2 | Connect the projector's AC power cord into an AC outlet. |
| The POWER indicator blinks red for a moment and then |
| turns to steady red. |
3 | Press the POWER |
| the remote control. The POWER indicator turns green |
| lighting and the cooling fans start to operate. The preparation |
| display appears on the screen and the countdown starts. |
4 | After the countdown, the input source that was last selected |
| and the Lamp mode status icon (see page 41) will appear on |
the screen.
16
The preparation display disappears after 20 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See page 41 for Lamp mode.)
If the projector is locked with a PIN code, PIN code Input Dialog Box appears. Enter the PIN code as instructed below.
Enter a PIN code
Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number.
Repeat this step to complete entering a
When the
If you enter a wrong PIN code, "PIN code" and the number (✳✳✳✳) will turn red and disappear. Enter a PIN code all over again.
PIN code Input Dialog Box
Pointer
After the OK icon disappears, you can operate the projector.
Basic Operation
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code; write down the number in column on page 59 of this manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
17
