Operation, Maintenance | Global Machinery Company ATI2K, ATIW1

Additional safety instructions for impact wrenches

This air impact wrench kit is designed for removing and installing nuts and bolts. With one hammer (Rocking Dog) impact mechanism and useful accessories, this kit is used as a general purpose tool kit by DIYers and hobbyists.

1.This impact wrench is a part of a high pressure system. Do not exceed maximum operating pressure of the air tool (90PSI). The impact wrench could explore and may result in death or serious injury.

2.Disconnect the impact wrench from air compressor before changing tools or accessories, servicing and during non-operation.

3.Always wear safety glasses and using hearing protection during operation.

4.Do not wear loose fitting clothing and jewellery which may become caught in moving parts and result in serious injury.

5.Do not depress trigger when connecting the air hose.

6.Always use accessories fittings designed for use with air tools. Use impact-quality sockets only. Do not use hand- tool sockets, damaged or worn accessories.

7.Never trigger the tool when not applied to a work object. Accessories must be securely attached.

8.Make sure all connections are secure and check air hoses for weak or worn condition before each use.

9.Disconnect air supply before installing or any maintenance.

Operation

Before each use:

•Drain water from air compressor tank and condensation from air lines. Refer to your air compressor instruction manual.

CAUTION: Disconnect the tool from the air supply before lubricating or changing sockets.

•Lubricate tool, see “Maintenance” section in this manual.

CAUTION: Impact sockets and accessories must be used with this tool. Do not use hand sockets and accessories.

•Select the required impact socket. This tool has a 1/2” square drive, use 1/2” deep sockets. Use 1/2” extensions only when needed.

IMPORTANT: The use of air filters and air line lubricators is recommended.

Maintenance

This impact wrench requires lubrication before initial use and before and after each additional use throughout its life.

Air motor lubrication

1.Disconnect the impact wrench from the air supply and hold the tool upside down.

2.Pull the trigger, put one teaspoon of air tool oil in the air inlet lubricating the air motor the air inlet (6), and then adjust the adjustable speed control (4) in both the forward and reverse directions to help circulate oil in the motor.

3.Reconnect the impact wrench to the air supply and cover the exhaust port (7) with a towel and run in both the forward and reverse directions for 20 seconds. Oil will discharge from the exhaust port when air pressure is applied. Any excess oil in the motor is immediately expelled from the exhaust port. Always direct exhaust port away from people or objects.

Impact mechanism lubrication

1.Disconnect the air impact wrench from the air supply.

2.Remove the allen head screw from the impact mechanism oil port (9) hole on the right side of the tool that has “OIL”.

3.Put three teaspoons of air tool oil in the oil port. Then, replace the screw.

4.Reconnect the impact wrench with the air supply

and run for 20 seconds. Lubricate the whole impact mechanism by rotating the tool upside down and sideways while running the tool.

ATI2K, ATIW1 specifications

Global Machinery Company, renowned for its innovative engineering and cutting-edge manufacturing processes, has made significant strides in the machinery sector with products like the ATIW1 and ATI2K. These advanced models not only enhance productivity but also incorporate numerous features designed to meet the diverse demands of modern industries.

The ATIW1 is equipped with a high-performance engine known for its efficiency and durability. Its modular design allows for easy servicing and adaptability to various operational needs. This machine is particularly favored in construction and mining sectors where heavy lifting and precision are paramount. One of its standout characteristics is its sophisticated hydraulic system that ensures smooth operation and excellent control, even in challenging environments.

In terms of technologies, the ATIW1 utilizes intelligent automation systems that optimize performance based on real-time data. This includes load sensing technology which adjusts power output based on the load, ultimately leading to fuel savings and reduced wear and tear. Additionally, operators benefit from a state-of-the-art ergonomic cabin, equipped with intuitive controls and a comprehensive display that provides instant feedback on machine performance.

On the other hand, the ATI2K represents the company’s commitment to versatility and energy efficiency. Designed for both heavy and light operations, it features a unique hybrid engine that allows for significant reductions in emissions while maintaining high output levels. This model is particularly appealing to companies striving to meet environmental regulations without compromising productivity.

The ATI2K is also notable for its compatibility with various attachments, making it suitable for a range of applications including agriculture, landscaping, and waste management. Its robust construction ensures durability, while its innovative cooling system extends operational hours without overheating issues.

Both models exemplify Global Machinery Company's dedication to quality and innovation. With integrated safety features that prioritize operator protection and machine reliability, the ATIW1 and ATI2K are not only superb examples of engineering prowess but also reflect the company's ongoing commitment to sustainability and operational excellence. As industries evolve, these machines stand ready to deliver outstanding performance and adaptability in a fast-changing marketplace.

Global Machinery Company ATI2K, ATIW1 Operation, Maintenance, Air motor lubrication

Models: ATI2K ATIW1