5.Remove the screw and hold the oil port hole over a container to allow excess oil to drain.

6.If the oil is dirty, repeat the procedure above until the oil comes out clear. Install the screw and tighten. The residual oil remaining in the impact

mechanism chamber is all that is needed for proper lubrication

Air supply

Air supply MUST be greater than air requirement of the tool. Recommended air compressor is 3/4HP tank for intermittent use; 1.5HP or larger for heavier duty use

Storage

The impact wrench must be lubricated before storing. Follow the air motor lubrication instructions. Only run for

3 seconds instead of 20 seconds because more oil needs to remain in the tool when storing.

Adjustable speed control

This impact wrench is equipped with a regulator for adjustable speed control (4). This switch is located at the rear of the tool. The impact wrench should NEVER be used to set torque. Use a torque wrench to set the torque.

To remove nuts, set the regulator to the maximum setting. To install nuts, set the regulator to the minimum to medium setting. Do not over-tighten the nuts.

Forward and reverse directions are controlled by rotating the speed control knob noted.

General inspection

1.Regularly check that all the fixing screws are tight.

2.The supply cord of the compressor should be checked frequently for damage. If damaged, have the cordset replaced by an authorised service facility to avoid a hazard.

Cleaning

1.Keep the tool’s air vents unclogged and clean at all times.

2.Remove dust and dirt regularly. Cleaning is best done with a soft brush or a rag.

3.Re-lubricate all moving parts at regular intervals.

4.If the body of the air tool needs cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like alcohol, petrol or other cleaning agent.

5.Never use caustic agents to clean plastic parts. CAUTION: Water must never come into contact with the tool.

Repairs

1.Only an authorised service centre should carry out repairs on air tools.

11

Page 10 Page 12
Page 11
Image 11
Global Machinery Company ATIW1, ATI2K Air supply, Storage, Adjustable speed control, General inspection, Cleaning, Repairs
Page 10 Page 12

ATI2K, ATIW1 specifications

Global Machinery Company, renowned for its innovative engineering and cutting-edge manufacturing processes, has made significant strides in the machinery sector with products like the ATIW1 and ATI2K. These advanced models not only enhance productivity but also incorporate numerous features designed to meet the diverse demands of modern industries.

The ATIW1 is equipped with a high-performance engine known for its efficiency and durability. Its modular design allows for easy servicing and adaptability to various operational needs. This machine is particularly favored in construction and mining sectors where heavy lifting and precision are paramount. One of its standout characteristics is its sophisticated hydraulic system that ensures smooth operation and excellent control, even in challenging environments.

In terms of technologies, the ATIW1 utilizes intelligent automation systems that optimize performance based on real-time data. This includes load sensing technology which adjusts power output based on the load, ultimately leading to fuel savings and reduced wear and tear. Additionally, operators benefit from a state-of-the-art ergonomic cabin, equipped with intuitive controls and a comprehensive display that provides instant feedback on machine performance.

On the other hand, the ATI2K represents the company’s commitment to versatility and energy efficiency. Designed for both heavy and light operations, it features a unique hybrid engine that allows for significant reductions in emissions while maintaining high output levels. This model is particularly appealing to companies striving to meet environmental regulations without compromising productivity.

The ATI2K is also notable for its compatibility with various attachments, making it suitable for a range of applications including agriculture, landscaping, and waste management. Its robust construction ensures durability, while its innovative cooling system extends operational hours without overheating issues.

Both models exemplify Global Machinery Company's dedication to quality and innovation. With integrated safety features that prioritize operator protection and machine reliability, the ATIW1 and ATI2K are not only superb examples of engineering prowess but also reflect the company's ongoing commitment to sustainability and operational excellence. As industries evolve, these machines stand ready to deliver outstanding performance and adaptability in a fast-changing marketplace.
Top Page Image Contents