Event Type: Host bus error

CAUTION: Only authorized technicians trained by HP should attempt to remove the system board. If you believe the system board requires replacement, contact HP Technical Support before proceeding.

Action: Replace the board on which the processor is installed.

Uncorrectable Memory Error (Slot X, Memory Module Y)...

...Uncorrectable Memory Error (System Memory)

Uncorrectable Memory Error (Memory Module Unknown)

Event Type: Uncorrectable error

Action: Replace the memory module. If the problem persists, replace the memory board.

HP BladeSystem infrastructure error codes

The server blade management modules and power management modules contain service ports that enable service personnel to gather fault information.

To gather the fault information:

1.Connect to the service port. For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

2.Access the diagnostics. For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

Server blade management module error codes

Server blade error codes

Location

LED codes

 

 

Server Blade - Slot 1

1-1 or 1-2

 

 

Server Blade - Slot 2

2-1 or 2-2

 

 

Server Blade - Slot 3

3-1 or 3-2

 

 

Server Blade - Slot 4

4-1 or 4-2

 

 

Server Blade - Slot 5

5-1 or 5-2

 

 

Server Blade - Slot 6

6-1 or 6-2

 

 

Server Blade - Slot 7

7-1 or 7-2

 

 

Server Blade - Slot 8

8-1 or 8-2

 

 

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

1.Reseat the server.

Refer to server documentation on the HP website (http://www.hp.com/products/servers/proliant- bl/p-class/info).

Server blade management module board error codes

LED code: 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, or 9-12

Location: Server blade management module

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

Error messages 127