Expansion will resume when automatic data recovery has been completed.
Audible Beeps: None
Possible Cause: The capacity expansion process has been temporarily disabled.
Action: Follow the action that is displayed onscreen to resume the capacity expansion process.
Audible Beeps: None
Possible Cause: Controller is overheating.
Action: Be sure adequate system cooling and sufficient airflow across controller are available.
Audible Beeps: None
Possible Cause: Power was lost while a logical expansion operation was performed. A controller reset or power cycle occurs while array expansion is in progress.
Action: No action is required.
...Select F1 to continue with logical drives disabled. Select F2 to accept data loss and to
Audible Beeps: None
Possible Cause: Data was lost while the array was expanded; therefore, the drives have been temporarily disabled. Capacity expansion failed due to:
•Array accelerator or hard drive failed or was removed; expansion progress data lost
•Expansion progress data could not be read from array accelerator
•Expansion aborted due to unrecoverable drive errors
•Expansion aborted due to array accelerator errors
Action:
•Press the F2 key to accept the data loss and
•Restore data from backup.
•Replace drive or array accelerator, as appropriate.
...Please upgrade firmware on the following drive(s) using ROM Flash Components (download from www.hp.com/support/proliantstorage): Model XYZ (minimum version = ####)
Audible Beeps: None
Possible Cause: Drive firmware update needed.
Action: The indicated drives are running firmware that is known to cause intermittent problems. Update all drives to the latest firmware version ("Firmware maintenance" on page 65).
Error messages 116