Identify Logical Drive Data did not Match with NVRAM

Description: The identify unit data from the array controller does not match with the information stored in NVRAM. This can occur if new, previously configured drives have been placed in a system that has also been previously configured.

Action: Run the server setup utility to configure the controller and NVRAM.

Insufficient adapter resources

Description: The adapter does not have sufficient resources to perform posted-write operations to the array accelerator board. Drive rebuild may be occurring.

Action: Operate the system without the array accelerator board until the drive rebuild completes.

Inter-Controller Link Connection Could Not Be Established

Description: Unable to communicate over the link connecting the redundant controllers.

Action: Be sure both controllers are using the same hardware and firmware revisions. If one controller failed, replace it.

Less Than 75% Batteries at Sufficient Voltage

Description: The operation of the array accelerator board has been disabled due to less than 75% of the battery packs being at the sufficient voltage level.

Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours.

Less Than 75% of Batteries at Sufficient Voltage Battery Pack X Below Reference Voltage

Description: Battery pack on the array accelerator is below the required voltage levels.

Action: Replace the array accelerator board if the batteries do not recharge within 36 powered-on hours.

Logical Drive X Failed Due to Cache Error

Description: This logical drive failed due to a catastrophic cache error.

Action: Replace the array accelerator board and reconfigure using ACU ("Array Configuration Utility" on page 54).

Logical Drive X Status = Failed

Description: This status could be issued for several reasons:

•Logical drive is configured for No Fault Tolerance, and one or more drives failed.

•Mirroring is enabled, and any two mirrored drives failed.

•Data Guarding is enabled, and two or more drives failed.

•Another configured logical drive is in the WRONG DRIVE REPLACED or LOOSE CABLE DETECTED state.

Error messages 81

Page 80 Page 82
Page 81
Image 81
HP ProLight Server manual Identify Logical Drive Data did not Match with Nvram, Insufficient adapter resources
Page 80 Page 82

ProLight Server specifications

The HP ProLiant server series is designed to deliver exceptional performance, scalability, and reliability for a variety of workloads, making it a popular choice among businesses of all sizes. Known for its robust architecture, the ProLiant series integrates cutting-edge technologies to support critical applications, virtualization, and cloud computing.

One of the defining features of HP ProLiant servers is their advanced management capabilities, facilitated by HP Integrated Lights-Out (iLO) technology. This embedded management tool offers remote access and monitoring capabilities, enabling IT administrators to oversee servers even when they are powered down. iLO provides essential features like firmware lifecycle management, power consumption monitoring, and system health checks, all of which simplify management and enhance uptime.

HP ProLiant servers leverage Intel's latest Xeon processors, which deliver impressive processing power and energy efficiency. The architecture supports multi-core processing, allowing for greater parallelism and improved operational efficiency. Furthermore, the series supports various memory configurations, with options for scalable and high-speed memory that can significantly enhance performance in memory-intensive applications.

Storage is another strength of the HP ProLiant series. The servers provide a range of storage options, including HDDs and SSDs, which enable organizations to configure systems to meet their performance and capacity requirements. HP’s Smart Array technology allows for advanced RAID capabilities, providing added data protection and redundancy, ensuring that critical information remains secure even during hardware failures.

HP ProLiant servers also focus on security, featuring built-in security technologies to protect against potential threats. Technologies such as silicon root of trust, secure boot, and firmware validation help safeguard server integrity from the ground up.

Scalability is essential for growing businesses, and the ProLiant series is designed to accommodate increasing workloads efficiently. Its modular architecture allows for seamless upgrades, ensuring that organizations can expand their infrastructure as needed without extensive downtime or resource expenditure.

In conclusion, the HP ProLiant server series blends performance, management, security, and scalability, making it a reliable choice for enterprise IT environments. With its robust features, advanced technologies, and focus on security and manageability, HP ProLiant servers provide businesses with the capability to meet their evolving IT demands effectively.
Top Page Image Contents