1.Press the server blade management module reset button.

2.Replace the server blade management module.

Server blade management module signal backplane error codes

LED code: 10-1, 10-2, or 10-3

Location: Server blade management backplane

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

1.Press the server blade management module reset button.

2.Replace the signal backplane.

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

Server blade management module power backplane A error codes

LED code: 11-1, 11-2, 11-3, or 11-4

Location: Server blade power backplane A

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

1.Press the server blade management module reset button.

2.Replace the power backplane.

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

Server blade management module power backplane B error codes

LED code: 12-1, 12-2, 12-3, or 12-4

Location: Server blade power backplane B

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

1.Press the server blade management module reset button.

2.Replace the power backplane.

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

Interconnect A Error Code

LED code: 13-1, 13-2, 13-3, or 13-4

Location: Interconnect device - side A

Action: Perform the following steps to resolve the problem. Stop when the problem is resolved.

1.Press the server blade management module reset button.

2.Reseat the interconnect device.

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

3.Replace the interconnect device.

For more information, refer to the HP BladeSystem Maintenance and Service Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-class/info).

Error messages 128