Set Configuration Command Issued

Description: A predictive failure warning for this hard drive has been generated, indicating that a drive failure is imminent.

Action: Replace this drive at the earliest opportunity. Refer to the server documentation for drive replacement information before performing this operation.

SCSI Port X, Drive ID Y...S.M.A.R.T. Predictive Failure Errors Have Been Detected

in the Power Monitor and Performance Data...

...SOLUTION: Please replace this drive when conditions permit.

Description: A predictive failure warning for this hard drive has been generated, indicating a drive failure is imminent.

Action: Replace this drive at the earliest opportunity. Refer to the server documentation for drive replacement information before performing this operation.

SCSI Port X, Drive ID Y Was Replaced On a Good Volume: (failure message)

Description: ADU ("Array Diagnostic Utility" on page 63) found that this drive was replaced, even though no problem occurred with the volume.

Action: No action is required.

Description: The configuration of the array controller has been updated. The array accelerator board may remain disabled until it is reinitialized.

Action: Run the server setup utility to reinitialize the array accelerator board.

Soft firmware upgrade required

Description: ADU ("Array Diagnostic Utility" on page 63) has determined that the controller is running firmware that has been soft upgraded by the Upgrade Utility. However, the firmware running is not present on all drives. This could be caused by the addition of new drives in the system.

Action: Update all drives to the latest firmware version ("Firmware maintenance" on page 65).

Storage Enclosure on SCSI Bus X has a Cabling Error (Bus Disabled)...

...SOLUTION: The SCSI controller has an internal and external cable attached to the same bus. Please disconnect the internal or external cable from the controller. If this controller supports multiple buses, the cable disconnected can be reattached to an available bus.

Description: The current cabling configuration is not supported.

Action: Refer to the server documentation for cabling guidelines, and reconfigure as indicated.

Storage Enclosure on SCSI Bus X Indicated a Door Alert...

...SOLUTION: Be sure that the storage enclosure door is closed or the side panel is properly installed.

Description: The side panel of the external storage unit is open.

Action: Be sure the side panel of the storage unit is securely closed.

Storage Enclosure on SCSI Bus X Indicated a Power Supply Failure...

...SOLUTION: Replace the power supply.

Error messages 86

ProLight Server specifications

The HP ProLiant server series is designed to deliver exceptional performance, scalability, and reliability for a variety of workloads, making it a popular choice among businesses of all sizes. Known for its robust architecture, the ProLiant series integrates cutting-edge technologies to support critical applications, virtualization, and cloud computing.

One of the defining features of HP ProLiant servers is their advanced management capabilities, facilitated by HP Integrated Lights-Out (iLO) technology. This embedded management tool offers remote access and monitoring capabilities, enabling IT administrators to oversee servers even when they are powered down. iLO provides essential features like firmware lifecycle management, power consumption monitoring, and system health checks, all of which simplify management and enhance uptime.

HP ProLiant servers leverage Intel's latest Xeon processors, which deliver impressive processing power and energy efficiency. The architecture supports multi-core processing, allowing for greater parallelism and improved operational efficiency. Furthermore, the series supports various memory configurations, with options for scalable and high-speed memory that can significantly enhance performance in memory-intensive applications.

Storage is another strength of the HP ProLiant series. The servers provide a range of storage options, including HDDs and SSDs, which enable organizations to configure systems to meet their performance and capacity requirements. HP’s Smart Array technology allows for advanced RAID capabilities, providing added data protection and redundancy, ensuring that critical information remains secure even during hardware failures.

HP ProLiant servers also focus on security, featuring built-in security technologies to protect against potential threats. Technologies such as silicon root of trust, secure boot, and firmware validation help safeguard server integrity from the ground up.

Scalability is essential for growing businesses, and the ProLiant series is designed to accommodate increasing workloads efficiently. Its modular architecture allows for seamless upgrades, ensuring that organizations can expand their infrastructure as needed without extensive downtime or resource expenditure.

In conclusion, the HP ProLiant server series blends performance, management, security, and scalability, making it a reliable choice for enterprise IT environments. With its robust features, advanced technologies, and focus on security and manageability, HP ProLiant servers provide businesses with the capability to meet their evolving IT demands effectively.

HP ProLight Server manual Set Configuration Command Issued, Soft firmware upgrade required

Models: ProLight Server

...SOLUTION: Please replace this drive when conditions permit.