Sprint Nextel 800w manual Receiving Information Over a Bluetooth Connection

Receiving Information Over a Bluetooth Connection

1.Go to your Today screen, and then tap Bluetooth .

2.Select the Mode tab and check the Turn on Bluetooth box to turn on the Bluetooth feature on your Treo.

3.If you haven’t already set up a partnership with the transmitting device, check the Make this device discoverable to other devices box to let the device find your Treo and request a connection.

4.Press OK .

5.When your Treo is receiving information, a notification tells you that a transmission is in

progress. (To stop the transmission, press Cancel [left softkey]; to close the notification, press Dismiss [right softkey].)

Wireless Connections

Tip

If you have trouble receiving information over a Bluetooth connection, press Start and select Settings. Select the Connections tab, and then select Beam. Make sure the Receive all incoming beams box is checked.

Remember to uncheck the Make the device visible to other devices box when you are done receiving information from the other device.

Synchronizing Over a Bluetooth Connection

Before You Begin

Make sure your computer is equipped with Bluetooth wireless technology and that your computer is set up for synchronization. See “Setting Up Your Computer for Synchronization” on page 46.

1.Set up your computer for Bluetooth wireless communication. (For details, see the documentation that came with your computer. In most cases your computer must support the Virtual Serial Port profile, and this profile must be turned on.)

2.Set up the Microsoft® ActiveSync® software on your computer for Bluetooth wireless communication. See ActiveSync Help on your computer for details.

Section 3F: Using Wireless Connections 199