Sprint Nextel 800w manual Disconnecting From a Wi-Fi Network, Customizing Wi-Fi Settings, 194

Disconnecting From a Wi-Fi Network

To disconnect from a Wi-Fi network, do one of the following:

⬤To save any settings you entered, press and hold Wi-Fi to disconnect from the Wi-Fi network. The next time you’re within range and the Wi-Fi feature is turned on, your Treo automatically connects to this network.

⬤Press Start , select Settings, select the Connections tab, and then select Wi-Fi. Highlight the network from which you want to disconnect, and then press Disconnect (left softkey).

⬤To remove the network settings from memory, press Menu (right softkey) and select Remove Settings. The next time you’re within range and the Wi-Fi feature is turned on, you must re-create the connection to connect to this network.

Customizing Wi-Fi Settings

1.Press Start and select Settings.

2.Select the Connections tab, and then select WiFi Prefs .

3.On the Power tab, set any of the following:

■Enable Power Save Mode: Conserve battery power when Wi-Fi is turned on. For optimum battery performance, leave this option enabled.

■Connection: Set when the Wi-Fi feature is on and when your Treo attempts to search for networks.

■On Button Press: Leave the Wi-Fi feature off until you

press Wi-Fi to turn it on. After you turn the Wi-Fi feature on, your Treo searches for available networks.

■Always On: Leave the Wi-Fi feature on. Your Treo searches for available networks whenever the screen is awake. If a network to which you previously connected is available, your device automatically connects to that network. To prevent your Treo from searching for networks, press and hold Wi-Fi to turn the Wi-Fi feature off.

194 Section 3F: Using Wireless Connections