310 Section 6B: Synchronizing Information
10. Check the boxes for the types of information you want
to sync with the Exchange server.
11. (Optional) Highlight an item and select Settings to change
the synchronization settings for that type ofinformation.
(Settings are not available for all items.)
12. (Optional) Press Menu (right softkey) and select
Advanced to set the rules for fixing sync conflicts.
13. Press Finish (left sof tkey). (Synchronization with
your Exchange server begins automatically and onscreen
messages indicate sync progress.)
You can set a schedule for synchronization to take place anytime information is updated on
either your Treo or the server, or at certain intervals (see “Setting the Synchronization
Schedule” on page 310), or you can allow synchronization to take place only when you
initiate it manually (see “Initiating a Wireless Sync Manually” on page 311).
Setting the Synchronization Schedule
By default, wireless sync takes place anytime information is updated on either your Treo or
the server using Direct Push technology. To save battery life, however, you can set
synchronization to take place at intervals that you specify.
1. Press Start and select Programs.
2. Select ActiveSync .
3. Press Menu (right softkey) and select Schedule.
Tip To automatically download more of an incoming email message than the
default setting, select E-mail in step 10, select Settings, and select a higher
number from the Download size limit list. If you don’t increase this setting,
you can manually download the rest of the message at your convenience.