3.Aim your Treo, as you would any camera, to frame the subject in the device’s screen. (Your Treo has a self-portrait mirror next to the camera lens on the back of your device. Use the mirror when you’re taking a picture or video and you want to be in the picture too.)

4.(Optional) Adjust any of the following:

Zoom: Press Up to zoom in, or Down to zoom out.

Brightness: Press Right to increase the brightness,

so you can take pictures in low-light environments, or press Left to decrease the brightness.

Resolution: Press Menu (right softkey) and select Resolution to change the image quality.

Tip

You can also adjust the zoom and brightness by pressing Menu and

 

selecting Zoom or Brightness.

 

 

5.(Optional) Set a five-second timer: Press Menu (right softkey), select Mode, and then select Timer.

6.Press Center to capture the picture or start the timer.

7.Hold your Treo still until the picture renders, and then press OK to save the picture, or press Menu (right softkey) and select Delete to discard the picture.

8.Do either of the following:

Press Center to take another picture.

Press Thumbnails (left softkey) to return to Thumbnails view.

Did you know? After three minutes of inactivity when you are previewing an image, the camera goes into standby mode. Press any key or tap the screen to return to the image preview.

Pictures & Videos

Section 4B: Working With Your Pictures and Videos

213

Page 213
Image 213
Sprint Nextel 800w manual Working With Your Pictures and Videos 213