134 Section 3B: Using the Email Features
11. Enter your incoming mail server address, select your
account type, and then press Next (right softkey).
12. Enter your account username and password.
13. If you want your password entered automatically, check the
Save password box; if you want to enter your password
each time you access this account, do not check this box.
(For a corporate email account, ask your system
administrator if it is OK to store your corporate email
password on your Treo. If it is not OK, don’t check the Save
password box.)
14. Press Next (right softkey).
15. Enter the following outgoing mail settings:
䡲Outgoing (SMTP) mail server: Enter the server name.
䡲Outgoing server requires authentication: Check the box
if your outgoing mail server requires authentication.
䡲Use the same user name and password for sending
e-mail: Check the box if the server requires you to use
your account username and password when sending
email.
16. (Optional) Select the Advanced Server Settings link, select
the following settings, and then press Done (left softkey):
䡲Require SSL for Incoming e-mail: Check the box if your
account requires SSL for incoming messages.
䡲Require SSL for Outgoing e-mail: Check the box if your
account requires SSL for outgoing messages.
䡲Network connection: Select the type of connection to
use for sending and receiving email.