Sprint Nextel 800w manual Setting Up an External GPS Device

Tip

This error-reporting method meets the privacy regulations of the European Union (EU) as well as the Fair Information Practice Principles of the Federal Trade Commission. To view the Fair Information Practice Principles, visit the Federal Trade Commission Web site at www.ftc.gov/reports/privacy3/fairinfo.htm.

If your Treo is connected to your computer when you send the error report, you are not billed for sending error reports—provided your computer is connected to the Internet. If you use the Sprint network to send an error report, data transfer charges apply.

1.Press Start and select Settings.

2.Select the System tab, and then select Error Reporting .

3.Select whether you want to enable or disable error reporting.

4.Press OK .

Setting Up an External GPS Device

If you purchased an optional Global Positioning System (GPS) receiver, your Treo can show your exact location on a map. The External GPS settings do not affect the built-in GPS features of your device.

1.Press Start and select Settings.

2.Select the System tab, and then select External GPS .

3.On the Programs tab, select the GPS program port list, and then select the port for applications to use to access GPS information. (This port must also be selected in your GPS application’s configuration settings.)

4.Select the Hardware tab.

5.Select the GPS hardware port list, and then select the port to which your GPS receiver is connected. (This must be a different port from the one you set in step 3 as your program port. To connect to the GPS device using Bluetooth® wireless technology, you must first set up a partnership between the two devices. See “Setting Up a Bluetooth Connection” on page 196.)

Customizing

Section 6C: Customizing Your Palm® Treo™ 800W Smart Device 337