Inserting the Battery

WARNING

Use only batteries and chargers that are approved by Sprint or Palm with your device. Failure to use an approved battery or charger may prevent your device from turning on or charging; may void your Treo warranty; and may increase the risk of your device overheating, catching fire, or exploding, which may also result in serious bodily injury, death, or property damage.

1.Gently press the battery door while sliding it downward to remove it.

1

2

1Battery Contacts

2 Device Contacts

2.Align the battery contacts with the device contacts, and then press the battery into place.

3.Slide the battery door onto the back of the Treo until it clicks into place. (Your device screen turns on and the Palm logo screen appears. Wait for the progress bar on the Palm logo screen to fill and for the Windows Mobile® screen to appear. If your Treo doesn’t turn on, you need to charge it by connecting it to the AC charger. If it still doesn’t start, do a soft reset. See “Resetting Your Palm® Treo™ 800W Smart Device” on

page 349).

28

Section 1A: Setting Up Your Palm® Treo™ 800W Smart Device

Page 28
Image 28
Sprint Nextel 800w manual Inserting the Battery