Section 3A: Sprint Power VisionSM—The Basics 117
Sprint Power Vision
details, or you can cancel synchronization. The sync software is not required when you
use your device as a modem.)
2. Make sure the phone on your Treo is turned on (see “Turning Your Phone On and Off”
on page 35) and that one of the data services icons ( or ) appears at the top of
the screen. (If you don’t see either of these icons, then you cannot use your Treo as a
modem.)
3. On your Treo, go to your Today screen (see “Accessing Your Today Screen” on page 76)
and select the Internet Sharing icon.
4. Select the PC Connection list, and then select USB.
5. In the Network Connection list, make sure that Power Vision
is selected.
6. Press Connect (left softkey). (When your computer
detects the connection, a connection icon appears in
the taskbar in the lower-right corner of your computer
screen.)
7. On your computer, open your Web browser to confirm that
you can connect to the Internet.
You now have an Internet connection on your computer via your Treo, and you can do
anything you would do using your usual Internet connection.
Tip You can also open Internet Sharing by pressing Start, selecting Programs,
and then selecting Internet Sharing.