Uniden UIP300G manual Specifications, Physical Interface, Power Supply, Speaker, LED Status

Table 1-1 LED Status

LED	LED On	LED Blinking		LED Off
Speaker/Headset	Turned on when the	N/A	When not used
	SPK/HS is pressed
Mute	While microphone is muted	N/A	While not muted
Message Waiting	When there is 1 or	Arrival of Incoming Call	when no more new
Indication	more new voice mail(s)	when	voice mail or no
		It is a regular call	incoming call
		It is a call waiting call	is waiting
		(Fast blinking)
Line 1	When in use	When Line 1 is on hold.	When not in use
		(Slow blinking)
		When incoming call
		comes thru Line 1
		(Fast blinking)
Line 2	When in use	When Line 2 is on hold.	When not in use
		(Slow blinking).
		When incoming call
		comes thru Line 2
		(Fast blinking)
Function Keys
Speed Dial/	Turned on when the	N/A	Whenever any of the
Voice Mail	key is pressed and it		following occurs:
	remain on for		•	5 seconds after it is
	5 seconds.			turned on
			•	When it returns to
				on hook
			•	A different speed
				dial key is pressed
Do Not Disturb	While DND is activated	N/A	While DND is off
(DND)

•The On and Off time for “Fast blinking” is 200 ms cycle and the time for “Slow blinking” is 1 sec. cycle.

•Line LED’s will blink during hold, if the Hold key is configured to perform local hold.

Specifications

The following specifications apply to the physical interface, power supply and speaker.

Physical Interface

◆10/100 Base-T (RJ-45) x 1

◆Handset (RJ-22) x 1

◆Headset (phone jack - 2.5 mm) x 1

◆DC Jack x 1

Power Supply

◆DC 48V, 0.25A (AD300)

◆Line Power (PowerDsine)

Speaker

◆8 Ω, 1 W

11