PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
OPERATING | MODEL |
INSTRUCTIONS | ESP45 |
AND PARTS |
|
MANUAL |
|
24-Volt 
Backup Sump Pump
SAFETY GUIDELINES
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates important information, that if not followed, may cause damage to equipment.
DESCRIPTION
The ESP45 is a battery operated back- up sump pump. It does not replace a regular pump. It is designed to provide protection in the event household electrical power fails or main pump fails.
UNPACKING
Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death.
GENERAL SAFETY INFORMATION
CALIFORNIA PROPOSITION 65
This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
GENERAL SAFETY
Do not use to pump
flammable or explosive fluids such as gasoline, fuel oil,
kerosene, etc. Do not use in a flammable and/or explosive atmosphere. Personal injury and/or property damage could result.
Disconnect power before servicing. If the power disconnect is out of sight, lock
in the open position and tag it to prevent unexpected application of power. Failure to do so could result in fatal electrical shock!
If the basement has water or moisture on the floor, do not walk on wet area until all power is turned off. If the shutoff box is in the basement , call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.
All wiring must be performed by a qualified electrician.
Do not expose battery to sparks or flames as an explosion or fire could result.
Battery acid is corrosive. Avoid spilling on skin or clothing. Eye protection must
be worn when handling the battery.
A check valve must be used on the primary sump pump discharge.
SPECIFICATIONS
Power supply requirements | 120V, 60 Hz |
Motor | Permanent Magnet DC Motor |
Normal water removal | 2880 GPH @5 ft. @ 26V DC |
Liquid temperature range | 40º F to 120º F |
Circuit requirements | 5 amps AC (min) |
Pump Dimensions | 11 inch high x |
Pump Run Time | 15 Seconds |
CONSTRUCTION
Motor housing | Cast Iron |
Impeller | Thermoplastic |
Shaft seal | Stainless Steel |
Discharge | |
Float Switch | Reed Style |
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
© 2010 WAYNE Pumps | For parts, product & service information | |
| visit www.waynepumps.com |
|
