Acer Veriton 5600GT/5600V manual Jumper and Connector Description, Jumper Setting, Label Component

Jumper and Connector Description

Label	Component	Label	Component
JPW1	ATX 12V Power Connector	JCI1	Chassis Intrusion Switch Connector
CPUFAN1	Processor Fan Connector	JBAT1	Clear CMOS Jumper
D_LED1	D Bracket 2 Connector	JBIOS1	BIOS Flash Jumper
COM1	9-pin Serial Port	JRECOVER	System Recovery Switch Connector
FDD1	FDD Connector	USB2/3	Front USB Connectors
ATX1	20-pin Power Connector	PCI1~3	Peripheral Component Interconnecto Slots
IDE2/1	Ultra ATA HDD Connectors	JAUD1	Front Panel Audio Connector
	IDE1: Primary IDE Connector
	IDE2: Secondary IDE Connector
SYSFAN1	System Fan Connector	CD1	CD-In Connector
SATA1/2	Serial ATA HDD Connectors	JLAN1	LAN Jumper
JFP1	Front Panel Connectors	AGP1	Accelerated Graphics Port Slot

Jumper Setting

Jumper	Function and settings
JBAT1
1
3	1-2 Normal*
1

3 2-3 Clear CMOS

JBIOS1

BIOS Flash Locked*

BIOS Flash Unlocked

JLAN1

1

3Enable

1

		3	Disable
	JAUD1
5				6
9					10 If you do not want to connect to the front audio header, pins 5 & 6,
	9 & 10 have to be jumpered in order to have signal output directed to the rear
	audio ports. Otherwise, the Line-Out connector on the back panel will not
	function.
	NOTE: *: Default Settings.
105						Chapter 5