(1)Create RAID Volume:
Select this option and press e. The following screen appears:
Specify a RAID Volume name and then press the vor ekey to go to the next field.
Select the strip value for the RAID 0/1 array by scrolling through the available values by using the wor ykeys and pressing the ekey to select and advance to the next field.
The available values range from 4KB to 128 KB in power of 2 increments. The strip value should be chosen based on the planned drive usage. Here are some suggested selections:
16 KB - Best for sequential transfers
64 KB - Good general purpose strip size
128 KB - Best performance for most desktops and workstations. The default value.
57 | Chapter 2 |
