Acer Veriton 5600GT/5600V, Veriton 3600GT/3600V manual Disabled, Onboard/AGP

Parameter	Description	Options
DRAM RAS# Precharge	This item controls the number of cycles for Row	2T, 3T, 4T
	Address Strobe (RAS) to be allowed to precharge.
	If insufficient time is allowed for the RAS to
	accumulate its charge before DRAM refresh,
	refresh may be incomplete and DRAM may fail to
	retain data. This item applies only when
	synchronous DRAM is installed in the system.
System BIOS Cacheable	Selecting Enabled allows caching of the system	Enabled
	BIOS ROM at F0000h-FFFFFh, resulting in better	Disabled
	system performance. However, if any program
	writes to this memory area, a system error may
	result.
Video BIOS Cacheable	Selecting Enabled allows caching of the video BIOS	Disabled
	ROM at C0000h to C7FFFh, resulting in better	Enabled
	video performance. However, if any program writes
	to this memory area, a system error may result.
Memory Hole at 15M-16M	In order to improve performance, certain space in	Disabled
	memory can be reserved for ISA peripherals. This	Enabled
	memory must be mapped into the memory space
	below 16MB. When this area is reserved, it cannot
	be cached.
Delay Prior to Thermal	When the CPU temperature reaches a factory	4 Min, 8Min, 16 Min, 32 Min
	preset level, a thermal monitoring mechanism will
	be enabled following the appropriate timing delay
	specified in this field. With the thermal monitoring
	enabled, clock modulation controlled by the
	processor’s internal thermal sensor is also
	activated to keep the processor within allowable
	temperature limit.
AGP Aperture Size (MB)	This setting controls just how much system RAM	4, 8, 16, 32, 64, 128 and 256
	can be allocated to AGP for video purposes. The
	aperture is a portion of the PCI memory address
	range dedicated to graphics memory address
	space. Host cycles that hit the aperture range are
	forwarded to the AGP without any translation.
Init Display First	This item specifies which VGA card is your primary	PCI Slot
	graphics adapter.	Onboard/AGP
On-Chip VGA	This setting determines whether the system RAM	Enabled
	can be allocated to on-chip video controller for	Disabled
	video purposes. When setting to Enabled, up to
	128MB system RAM will be allocated to on-chip
	video controller.
On-Chip Frame Buffer Size	Frame Buffer is the video memory that stores data	1M, 8M, 16M
	for video display (frame). This field is used to
	determine the memory size for Frame Buffer.
	Larger frame buffer size increases video
	performance.
Boot Display	Use this field to select the type of device you want	Auto, CRT, TV, EFP
	to use as the display(s) of the system.

Chapter 2 36