Entering Setup
To enter Setup, press the key cduring the POST
NOTE: You must press csimultaneously while the system is booting.
The Setup Utility main menu then appears:
The above screen is the BIOS Utility Basic Level screen. It allows you to view and change only the basic configuration of your system.
The command line at the bottom of the menu tells you how to move within a screen and from one screen to another.
To select an option, move the highlight bar by pressing w, y, z, or x, then press e.
To change a parameter setting, press {or }until the desired setting is found, or press eto pop out the screen with available items for selection.
Press^to return to the main menu. If you are already in the main menu, press ^again to exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your system.
The grayed items on the screens have fixed settings and are not
27 | Chapter 2 |
