Nortel Networks 14.2 manual Parameter Connector Subnet Mask, Parameter Connector Next Hop

Site Manager Parameters

Parameter: Connector Subnet Mask

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Interfaces Default: None

Options: Any valid IP subnet mask

Function: Specifies the network and subnetwork portion of the 32-bit IP address of this interface. The Configuration Manager automatically calculates an appropriate subnet mask, depending on the class of the network to which the interface connects. However, you can change the subnet mask using this parameter.

Instructions: Accept the assigned subnet mask, or specify one in dotted-decimal notation. MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.5

Parameter: Connector Next Hop

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Interfaces Default: None

Options: Any valid IP address

Function: Specifies the IP address of the next-hop router connected to this interface. When the router starts up, the next-hop router passes the BootP requests and responses that initiate the transfer of the image and/or configuration file between the router and the BootP server. If the router and BootP server are on the same IP subnet, you do not have to set this parameter.

Instructions: Specify the IP address of the next-hop router connected to this interface in dotted-decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.6

Parameter: Connector Protocol Mask

Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Interfaces Default: Point to Point

Options: Point to Point Point to Point Internal Clock Fr Relay Annexd Fr Relay Annexa Fr Relay LMI

Function: During the boot process, the router configures the synchronous interface for the specified protocol.

Instructions: Specify the desired protocol option. MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.7

308614-14.20 Rev 00 A-5