Configuring Remote Access for AN and Passport ARN Routers
Netboot and Directed Netboot Parameters
Parameter: Boot Image From Network
Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Global Default: Disable
Options: Enable Disable
Function: Enables or disables retrieval of the boot image from the BootP server the next time the router starts up.
Instructions: Set to Disable if you want to boot using the image in the router’s local file system. This setting reduces the time it takes to boot the router and eliminates using network resources to obtain the image.
Set to Enable if:
•You want the router to obtain the image from a BootP server and you have already set up the network to support BootP.
•You are upgrading the image on several routers. The routers can then boot using a single image on the BootP server. Make sure that the directory name in the bootptab file matches the location of the upgraded image before you boot the routers.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.1
Parameter: Boot Config From Network
Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Global Default: Enable
Options: Enable Disable
Function: Enables or disables retrieval of the configuration file from the BootP server the next time the router starts up.
Instructions: Set to Disable if you have already saved the configuration file to the router’s flash memory file system, and you want to boot using this configuration file. This setting reduces the time it takes to boot the router and eliminates using network resources to obtain the configuration file.
Set to Enable if you want the router to obtain the configuration file from a BootP server and you have already set up the network to support BootP.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.2
|
