Preface
308614-14.20 Rev 00 xv
This guide uses the following acronyms:
italic text Indicates file and directory names, new terms, book
titles, and variables in command syntax descriptions.
Where a variable is two or more words, the words are
connected by an underscore.
Example: If the command syntax is:
show at <
valid_route
>
valid_route
is one variable and you substitute one value
for it.
screen text Indicates system output, for example, prompts and
system messages.
Example: Set Trap Monitor Filters
separator ( > ) Shows menu paths.
Example: Protocols > IP identifies the IP option on the
Protocols menu.
vertical line ( | ) Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is:
show ip {alerts | routes}, you enter either:
show ip alerts or show ip routes, but not both.
ANSI American National Standards Institute
ARP Address Resolution Protocol
AUI Attachment Unit Interface
BofL Breath of Life
BootP Bootstrap Protocol
BootPD Bootstrap Protocol Daemon
BRI Basic Rate Interface