Nortel Networks 14.2 manual Choose Relay Agent Interface Table, Input IP Address Output IP Address

Configuring Netboot Services with Site Manager

You can use Site Manager to create the BootP relay agent forwarding table.

Site Manager Procedure

You do this			System responds
1.	In the Configuration Manager window,		The Protocols menu opens.
	choose Protocols.
2.	Choose IP.		The IP menu opens.
3.	Choose BOOTP.		The BOOTP menu opens.
4.	Choose Relay Agent Interface Table.		The BOOTP Relay Agent Interface Table
			window opens.*
5.	Click on Forward I/F (interface).		The BOOTP Relay Agent Forwarding
			Table window opens.
6.	Click on Add.		The BOOTP Addresses window opens.
7.	Set the following parameters:
	•	Input IP Address
	•	Output IP Address
	Click on Help or refer to the parameter
	descriptions beginning on page A-7.
8.	Click on OK.		The BOOTP Relay Agent Forwarding
			Table window lists the connector and
			input IP address on the left, and the
			connector and output IP address on the
			right.
			If you specify an IP address of an
			interface that is not configured, ???
			appears instead of the connector (for
			example, ??? 192.32.23.3). If you
			configure the IP address, Site Manager
			displays the appropriate connector.
9.	Click on Done.		You return to the BOOTP Relay Agent
			Interface Table window.

*Click on Help or see Configuring SNMP, BootP, and DHCP Services for a description of the parameters in the BOOTP Relay Agent Interface Table window. Make sure that the Timeout Secs. parameter is set to the default, 0.

308614-14.20 Rev 00 3-13