Nortel Networks 14.2 Testing and Resetting ANH Repeater Ports, Choose Group Parameters, Selftest

Managing ANH Repeater Ports

Testing and Resetting ANH Repeater Ports

You can use Site Manager to test and reset ANH repeater ports.

Site Manager Procedure

You do this			System responds
1.	In the Site Manager main window, choose		The Tools menu opens.
	Tools.
2.	Choose Configuration Manager.		The Configuration Manager menu opens.
3.	Choose Dynamic.		The Configuration Manager window
			opens, displaying the real-time router
			hardware and software configuration.
4.	Choose Platform.		The Platform menu opens.
5.	Choose Setup Repeater.		The Setup Repeater menu opens.
6.	Choose Group Parameters.		The Group Parameters window opens.
7.	Set the following parameters:		The Configuration Manager tests each
	•	Reset	repeater port and indicates in a log file
	•	Selftest	whether the ports pass the diagnostics.
	Click on Help or refer to the parameter
	descriptions beginning on page A-9.
8.	Click on OK.		Site Manager executes the action(s)
			specified in the Group Parameters
			window and then closes the window.

Note: The repeater port self-test does not disrupt traffic flow. Resetting a repeater port does disrupt traffic flow; however, it does not affect the management counters defined in the RFC 1516 MIB specification.

308614-14.20 Rev 00 5-5