Nortel Networks 14.2 manual Using the Quick-Start Local Boot Procedure

		Using the Quick-Start Local Boot Procedure
Global Information Worksheet (continued)
Prompt	Options		Your Response
Enter clock source	1.	Internal
number [2]:	2.	External
Enter clock speed number	This prompt appears only if you chose an
[10]:	internal clock source.
	The script lists a range of values, with 64K as
	the default.
Enter circuit name [S#]:	The script displays a default circuit name for		Press the [Return] key.
	the COM interface you selected (for example,
	S11 for COM1 and S12 for COM2).
Enter IP address in	Enter the IP address for the COM interface.
dotted decimal notation:
Enter IP subnetwork mask	Enter the subnet mask for the COM interface
in dotted decimal	IP address.
notation:
Is the router connected	y(es)		Press the [Return] key.
to the same local area	n(o)
network as the Site
Manager workstation?
(y/n) [n]:
Enter routing protocol	1.	RIP	Complete the worksheet
number [1]:	2.	OSPF	for the protocol you select.
	3.	Static Route to Site Manager
Enter wide area protocol	1.	Nortel Networks Point-to-Point Protocol	Complete the worksheet
number [1]:		(Proprietary)	for the protocol you select.
	2.	Frame Relay
	3.	Point-to-Point Protocol (PPP) Standard
	4.	Switched Multimegabit Data Service
		(SMDS)
Do you wish to set	y(es)
SNMP community	n(o)
management?
(y/n) [n]:	Setting up SNMP community management is
	optional.
Enter (TFTP) volume	The script automatically selects 1 as the
number [1]:	TFTP default volume.
Do you want to enable	y(es)
FTP? (y/n) [n]:	n(o)
	Enabling FTP is optional.
308614-14.20 Rev 00			C-5