Configuring Remote Access for AN and Passport ARN Routers
Displaying the Number of Packets Forwarded and Dropped
This section describes how to display the number of BootP packets forwarded and dropped by a router. Perform this procedure for each router between the AN/ANH or ARN router and the BootP server.
You can use either the Statistics Manager Quick Get tool or the Technician Interface get command to retrieve this information. For additional information about Quick Get, see Configuring and Managing Routers with Site Manager.
Quick Get Instructions
1.Select the following path:
wfApplication/wfInternet/wfBootpGroup/wfBootpRelayAgentGroup/ wfBootpRelayIntfTable
2.To display the number of packets forwarded, select the following:
wfBootpRelayIntfRequests
3.To display the number of packets dropped, select the following:
wfBootpRelayIntfHopsDrops
Technician Interface Instructions
Enter the following command to display information that may help you determine if and why a device is dropping packets, where IP_address is the address of the interface receiving the packets:
get wfBootpRelayIntfEntry.*.<IP_address>
|
