Nortel Networks 14.2 manual Dce

Configuring Remote Access for AN and Passport ARN Routers

Nortel Networks Proprietary PPP Worksheet

Prompt	Options		Your Response
Enter BofL (Breath of Life)	Enter the maximum amount of time
timer value (1-60) [5]:	between the transmission of BofL
	messages.
Enter Local Address	1.	DCE
selection [3]:	2.	DTE
	3.	EXPLICIT
	Note: Reverse the local and remote
	address values when configuring the
	device at the other end of the circuit.
	(Exception: When connecting to a
	Nortel Networks Series 5 router that
	uses DCE/DTE addressing, use the
	same local address value.)
Enter Remote Address	1.	DCE
selection [3]:	2.	DTE
	3.	EXPLICIT
	Note: Reverse the local and remote
	address values when configuring the
	device at the other end of the circuit.
	(Exception: When connecting to a
	Series 5 router that uses DCE/DTE
	addressing, use the same remote
	address value.)

C-10 308614-14.20 Rev 00