HP 377707-002 manual Operational State field, Boot Stage field

20

Table 3-2:Card Properties Window Elements (Continued)

Element	Description
Operational State field	Displays the general condition of the interface card. The general
	condition may appear as any of the following:
	•	unknown
	•	normal
	•	wrong-image
	•	bootFailed
	•	tooHot
	•	booting
	A condition of unknown indicates an unsupported interface
	card. To address this condition, replace the card with a
	supported card.
	The operational state of a card must appear as normal for the
	current status of the card to appear as up.
	A wrong-imagecondition indicates that the active system
	image on the interface card does not match the active system
	image on the controller. All cards must run the same active
	system image as the controller card to function.
	A bootFailed condition indicates that the active system image
	on the card was incompletely or incorrectly loaded. If the other
	interface cards come up successfully, reset the individual card.
	Otherwise, reboot your entire device.
	When your card overheats, the tooHot condition appears in the
	show card command output. Enter the show fan command to
	check to see if your fans failed.
	The booting condition indicates that the card has not finished
	loading necessary image data for internal configuration.
Boot Stage field	Boot Stage appears as one of the following:
	•	recovery
	•	ipl
	•	ppcboot
	•	fpga
	•	pic
	•	ib
	•	rootfs
	•	kernel
	•	exe
	•	done
	•	none