9
2
Getting Started
The following sections appear in this chapter:
•“Preparing Your Device” on page 9
•“Launching Chassis Manager” on page 11
•“Navigating Chassis Manager” on page 14
•“Understanding Access Privileges” on page 15
•“Viewing Device Status” on page 15
Preparing Your Device
To launch CM on your Server Switch, you must:
•Configure an IP address on the Ethernet management port.
•Configure an IP gateway on the Ethernet management port.
•Enable HTTP and/or HTTPS services.
NOTE: CM optionally supports Secure Sockets Layer (SSL) secure connections.
If your device meets these requirements, proceed to “Launching Chassis Manager” on page 11.
Otherwise, to prepare your device:
