HP 377707-002 Viewing Redundancy Groups, Adding Bridge Forwarding, Deleting Bridge Forwarding

65

Table 6-4:Bridge Forwarding Fields (Continued)

Field	Description
Next Hop	First hop out of the Server Switch to forward packets that you ultimately want to
	arrive at the destination.
Subnet Prefix	Subnet prefix of the bridge group.
Prefix Length	Subnet prefix length, in bits, of the bridge group.

Adding Bridge Forwarding

To add a bridge subnet:

1.Expand the Ethernet icon in the Tree frame.

2.Click the Bridge Forwarding branch.

3.Click the Add button. The Add Ethernet Bridge Group Forwarding window opens.

4.Enter the ID of the bridge group in the ID field.

5.Click the eth or ib radio button to specify IP or IPoIB respectively.

6.Enter an IP address in the Destination Address field.

7.Enter the destination length in the Dest Length field.

8.Enter the IP address of the next hop in the Next Hop field.

9.Inter the subnet prefix in the Subnet Prefix field.

10.Enter the subnet prefix length, in bits, in the Prefix Length field.

11.Click the Apply button.

Deleting Bridge Forwarding

To delete a bridge subnet:

1.Expand the Ethernet icon in the Tree frame.

2.Click the Bridge Forwarding branch.

3.Click the radio button next to the forwarding group that you want to delete, then click the Delete button.

Viewing Redundancy Groups

To view the redundancy groups on your Server Switch:

1.Expand the Ethernet icon in the Tree frame.

2.Click the Redundancy Group branch. The Redundancy Group display appears in the View frame. Table 6-5lists and describes the fields in this display.

Table 6-5:Redundancy Group Fields

Field	Description
ID	ID number of the redundancy group.
Name	Name of the redundancy group.
Multicast PKey	Partition key of the multicast group to which the redundancy group
	belongs.
Load balancing	Displays enabled if load balancing runs, otherwise displays disabled.
Members	Number of members in the redundancy group.