74
Viewing Fibre Channel Target Properties
To view the properties of a Fibre Channel target:
1.Expand the Fibre Channel icon in the Tree frame.
2.Click the Targets branch. A Targets table that includes all targets in your configuration file appears in the View frame.
3.Click the radio button next to the target whose properties you want to view, then click the Properties button. The SRP Target Properties window opens. Table
Table
Element |
| Description | ||
WWPN field |
| WWPN of the port on the target through which your Server Switch | ||
|
| accesses the target. | ||
|
|
| ||
WWNN field |
| WWNN of the target. | ||
|
|
| ||
FC Address field |
| FC address of the target. | ||
|
| |||
IOC GUID field | InfiniBand I/O controller (IOC) through which initiators access the | |||
|
| target. | ||
|
|
| ||
Physical Access |
| Port on your Server Switch (in slot#/card# format) through which your | ||
field |
| Server Switch accesses the target. | ||
|
| |||
MTU field | Maximum transmission unit, in bytes, of the target. | |||
|
|
| ||
Connection Type |
| Provides the down and nlPort radio buttons so you can assign a | ||
field |
| connection type to the target. | ||
|
|
| ||
Description field |
| |||
|
|
|
|
|
|
| NOTE: If no user has assigned a description, a default description | ||
|
| appears. | ||
|
|
|
| |
|
|
| ||
Service Name field |
| Name of the service to associate with the WWPN. | ||
|
|
| ||
Apply button |
| Applies the changes that you make in the window. | ||
|
|
| ||
Reset button |
| Resets the fields in the window to match the properties of the target. | ||
|
|
| ||
Close button |
| Closes the window. If you close the window before you apply changes, | ||
|
| CM makes no changes to the target. | ||
|
|
| ||
Help button |
| Opens | ||
Configuring Fibre Channel Target Properties
To configure the properties of a FB target:
1.Expand the Fibre Channel icon in the Tree frame.
2.Click the Targets branch. A Targets table that includes all targets in your configuration file appears in the View frame.
3.Click the radio button next to the target whose properties you want to view, then click the Properties button. The SRP Target Properties window opens.
4.(Optional) Click the down radio button or nlPort radio button to configure the connection type of the target.
5.(Optional) Enter a description in the Description field.
