HP 377707-002 manual Viewing Node Ports

50

Table 5-7:Switch Properties Window Fields (Continued)

Field	Description
Linear FDB Top	Specifies the top of the linear forwarding table. Packets
	received with unicast LIDs greater than this value are
	discarded by the switch. This parameter applies only to
	switches that implement linear forwarding tables and is
	ignored by switches that implement random forwarding
	tables.
Default Port	Specifies the default port to forward all the unicast packets
	from other ports whose destination local identifier (DLID)
	does not exist in the random forwarding table.
Default Primary MCast Port	Specifies the default port to forward all the multicast packets
	from other ports whose DLID does not exist in the multicast
	forwarding table.
Default Non-Primary MCast	Specifies the port to forward all the multicast packets from
Port	default-pri-mcast-port whose DLID does not exist in the
	multicast forwarding table.
Lifetime Value	Specifies the duration a packet can live in the switch. Time
	units are in milliseconds. Refer to section 18.2.5.4,
	Transmitter Queueing, “InfiniBand® Architecture, Vol. 1,
	Release 1.0”, for more information.
Switch Port State Change	Indicates a change in port state. The value changes from
	NotInTransition to PortInTransition anytime the State
	parameter of a port changes from down to initialize, initialize
	to down, armed to down, or active to down, as a result of
	link state machine logic.
LID Per Port	Number of LID/LMC combinations that may be assigned to a
	given external port for switches that support the random
	forwarding table. This value is always 0. 0 indicates that there
	is one LID per port.
Partition Enforce Cap	Number of entries in this partition enforcement table per
	physical port. Zero (0) indicates that partition enforcement is
	not supported by the switch.
In Enforce Cap	Indicates if the switch is capable of partition enforcement on
	received packets. The value is true or false.
Out Enforce Cap	Indicates if the switch is capable of partition enforcement on
	transmitted packets. The value is true or false.
In Filter Raw Packet Cap	Indicates if the switch is capable of raw packet enforcement
	on received packets. The value is true or false.
Out Filter Raw Packet Cap	Indicates if the switch is capable of raw packet enforcement
	on transmitted packets. The value is true or false.

Viewing Node Ports

To view the IB ports on a node in your IB fabric:

1.Expand the InfiniBand icon in the Tree frame.

2.Expand the Topology icon in the IB frame.

3.Click the Nodes branch. The Nodes table appears in the View frame.