HP 377707-002 manual Configuring a Trunk Group, Deleting a Trunk Group, IfIndex field

68

Table 6-7:Ethernet Trunk Group Properties Window Elements (Continued)

Element	Description
MAC Address field	Displays the MAC address of the trunk group, such as
	00:05:ad:01:59:30. This is a unique physical address associated
	with the trunk (link-aggregated) interface. This address is separate
	from the individual port MAC addresses.
IfIndex field	Displays a management software unique identifier for all physical
	and logical (trunks, gateway ports) interfaces.
Apply button	Applies the changes that you make in the window.
Reset button	Resets the fields in the window to match the properties of the trunk
	group.
Close button	Closes the window. If you close the window before you apply
	changes, CM makes no changes to the trunk group.
Help button	Opens on-line help.

Configuring a Trunk Group

To configure an existing trunk group:

1.Expand the Ethernet icon in the Tree frame.

2.Click the Trunk Groups branch. The Trunk Groups table appears in the View frame.

3.Click the radio button next to the group that you want to delete, then click the Properties button. The Ethernet Trunk Group Properties window opens.

4.(Optional) Create or change the name of the trunk group in the Name field.

5.(Optional) Check or uncheck checkboxes in the Port Members field to add or remove ports from the group.

6.(Optional) Click a radio button in the Distribution Type field to change the type.

7.(Optional) Check or uncheck the Enabled checkbox in the Trunk Group Enabled field to enable or disable the trunk group.

8.Click the Apply button.

Deleting a Trunk Group

To delete a trunk group:

1.Expand the Ethernet icon in the Tree frame.

2.Click the Trunk Groups branch. The Trunk Groups table appears in the View frame.

3.Click the radio button next to the group that you want to delete, then click the Delete button.