Eclipse - Fujitsu Ten CD4000 manual ESN security operating procedure, About ESN

ESN security operating procedure

ESN security operating procedure

About ESN

This equipment incorporates ESN (Eclipse Security Network). The ESN is a security system which disables all the equipment functions when the power is restored if the equipment is stolen from the vehicle. Once the ESN is activated, removing power to the equipment or vehicle will activate the security feature. Setting or canceling of the security feature can be done with a "Key CD". It is necessary to register a music CD as the "Key CD" in advance.

How to operate the ESN (Key CD) security

How to program the Key CD

Check that the equipment is in

1 standby.

Press and hold the [ILUM / FUNC]

2 button, then button [6], and hold

both for more than one second.

4 Insert the CD into the slot.

A [SEC] message appears, then the Key CD is ejected.

5 Press the [CD ] button.

The front panel closes.

ATTENTION

•If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsert the ejected CD.

•If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds. Try another CD.

•Copy Protected CD and MP3/WMA CD-ROM cannot be programed for Key CD security.

•The Security indicator will flash whenever the vehicle's ignition is switched off.

VI

VII

A [SEC] message appears, in two seconds it will change to [DISC].

ATTENTION

•If a CD has already been inserted, a [SEC] message appears, and then the front panel opens and the CD is ejected.

•If a security is activated, programing the Key CD is not available.

3 Press the [CD ] button.

The front panel opens; The CD4000 is now ready for your Key CD in the CD slot.

How to cancel the Key CD

Check that the equipment is in

1 standby.

Press and hold the [ILUM / FUNC]

2 button, then button [6], and hold

both for more than one second.

A [SEC] message appears, then in two seconds it will change to [DISC].

3 Press the [CD ] button.

The front panel opens; The CD4000 is now ready for your Key CD in the CD slot.

29