Eclipse - Fujitsu Ten CD4000 manual Return to the root directory of the CD, Displaying CD text

Operation

Return to the root directory of the CD

In the root directory, when a file cannot replay, the system will return to the first file that can perform a replay. (In the configuration example, the file is returning to 001.mp3. see page 17.)

1 Press the [RTN] button.

Displaying CD text

Only this CD player supports CD TEXT. It can not be displayed with the optional CD changer. If the CD came with a logo shown below, it is recorded with a disc title and track titles. These information will be displayed during playback.

Press the [DISP] button for more

1 than one second.

Pressing the [DISP] button while text is displayed scrolls the display in the order DISC title ➔ TRACK title, and then the display stops with the TRACK title.

CD TEXT recorded with characters other than alphanumeric and symbols cannot be displayed.

Displaying title (MP3/WMA)

Press the [DISP] button for more

1 than one second.

Each time the button is pressed, the following will be displayed in order. Folder Name/File Name* ➔ Folder No. /File No. ➔ Tag

*:The display area shows a maximum of 9 characters and then scrolls to display the remaining characters.

After the folder name is displayed, the file name will be displayed by scrolling. After the file name is scrolled, the display will be fixed.

ATTENTION

Folder name/file name or tag recorded with characters other than alphanumeric and symbols cannot be displayed.

Ejecting the disc

1 Press the [CD ] button.

The front panel opens and the disc is ejected.

Remove the disc and press the

2 [CD ] button.

The front panel closes.

CAUTION

•Do not drive with the front panel open. The panel may cause unexpected personal injury during a panic stop or abrupt changes of vehicle motion.

•Do not attempt to close the front panel by hand. Doing so may damage the panel.

22