Eclipse - Fujitsu Ten CD4000 manual Others, Connecting portable audio players to the AUX jack

About optional equipment

Others

Connecting portable audio players to the AUX jack

Use a commonly available accessory cord. With the RCA connector to connect a portable audio players and other external inputs can be connected to the system.

There are 2 connection terminals on this equipment; one for RCA connector and the other for optional LAN cable (AUX 105).

1	Turn on the portable audio player
	and start its play function.
	Switch to AUX mode by pressing
2
	the [DISC] button for more than
	one second.
	Activation of the AUX mode will light
	the "AUX" indicator and channel
	audio player output to the system
	speakers.
	Press the button [3] to switch the
3
	AUX mode.

Each time the button is pressed, the mode will switch as follows:

AUX1(Input) ↔ AUX1(Sub Input)

ATTENTION

•While the AUX mode is activated, actions such as turning off the audio player or pulling out the connection cord may cause noise spikes that can damage the system speakers. Be sure to avoid this possibility by turning off system power or switching from the AUX mode to another mode before shutting off or disconnecting the portable audio player.

•Audio output levels will differ for the various devices that can be connected by this method. Carefully adjust volume until the output level of the connected player is known.

•Before using a portable audio player in a vehicle, read the player's operation manual carefully and confirm problem-free operation in the vehicle before proceeding.

Changing auxiliary input sensitivity

The sensitivity of the auxiliary mode can be changed.

Press the [ILUM / FUNC] button for

1 more than one second.

The function mode is activated.

Turn the [SEL] button to select

2 AUX Sensitivity.

3 Press the [SEL] button.

The AUX sensitivity mode is activated.

Turn the [SEL] button to select the

4 sensitivity mode.

Turning the button allows you to toggle through sensitivity modes as follows:

Low ➔ Mid ➔ Hi ➔ Lowwww

ATTENTION

Input sensitivity modes are roughly as follows:

Low	1 Vrms
Mid	480 mVrms
Hi	240 mVrms

5 Press the [SEL] button.

The selected settings will take effect.

6 Press the [RTN] button.

At this time, other adjustments can also be mode in function mode.

Press the [ILUM / FUNC] or [RTN]

7 button to exit function mode.

56