Eclipse - Fujitsu Ten CD4000 manual Setting the steering switch function U.S.A. only

Making changes with Function Mode

Setting the steering switch function (U.S.A. only)

The vehicle’s factory loaded steering switch becomes inoperable when the CD4000 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering switch operation even with the installation of the equipment. Import this software into your CD4000. For details, contact the store from which you purchased your equipment. Depending on your vehicle’s make and model, material downloaded from the website may not be compatible with your steering switch.

Software for the steering switch can be downloaded and imported into the equipment as follows:

Access The ECLIPSE Website. (URL : http://www.e-iserv.jp)

Download the steering switch software following instructions provided on the ECLIPSE website (E-iSERV). (Because material available on the website may not be compatible with the steering switches found on some automobiles, make sure to check the website for details about compatibility.)

Copy the downloaded software to CD-R.

Import the data into the equipment from the CD-R.

(For details about importing into the equipment, see page 43.)

The steering switch can be operated.

ATTENTION

Consult the store from which you purchased your CD4000 about compatibility and set-up procedures.

XII

45