Eclipse - Fujitsu Ten CD4000 manual How to change the Key CD

Various Settings

ATTENTION

If a CD has already been inserted, a [SEC] message appears, and then the front panel opens and the CD is ejected.

4 Insert your Key CD into the slot.

A [CANCEL] message appears, then the Key CD is ejected.

The Key CD is cancelled.

ATTENTION

•This process cancels the protection of ESN equipment.

•If power to the ESN equipment is disconnected, then reconnected, a Key CD will not need to be inserted in order to return the unit to normal operation.

•Inserting a CD other than the Key CD will not cancel the protection. Instead, the display [ERR] for two seconds, then the normal CD playback mode will activate.

5	Press the [CD ] button.
	The front panel closes.
How to change the Key CD
1	First, cancel the existing Key CD.
	Refer to "How to cancel the Key CD".
2	Next, program a new Key CD.
	Refer to "How to program the Key
	CD".

How to resume normal operation (ESN security lock out)

If power is disconnected while ESN security is active (a Key CD was programed), operation is disabled until power is restored and the equipment unlocked. Follow this procedure to resume normal operation.

When the power is turned on after

1 disconnecting the battery power, a [SEC] message will appear for two seconds. Thereafter, the message changes to [DISC] and press the [CD ] button, then the CD4000 is ready to accept your Key CD into the slot.

2 Insert your Key CD.

If the correct CD is inserted, an [OK] message will appear for two seconds and the CD will begin playing.

ATTENTION

•If the incorrect CD is inserted, an [ERR_ ] ("ERR" and error number) message will appear for two seconds, after which the CD will be ejected.

•If [ERR5] (the 5th time an error has occurred) appears, [HELP] will appear, after which the CD will be ejected. When [HELP] appears, carry out the operations for an ESN security lock out by following the procedure in "What happens if an incorrect CD is inserted?" on page 31.

•You must use the same CD used for Key CD programing; a duplicate CD may not work properly.

30