Patton electronic How to Disconnect, Model 3088A Series Getting Started Guide, Introduction

Model 3088A Series Getting Started Guide 5 • Remote console operation

Note The local or remote 3088A may be CO or CPE, as long as there is one of each. Either the CO or CPE unit may accept a remote console connection.

Note With a remote console session open, a user at PC (far-end) is blocked from using the local console. Upon typing anything, the 3088A (far-end) sends a message to the PC (far-end) stating Console: Remote console connection is open.

Figure 17 is a screenshot of opening a typical remote console session:

Log in to 3088 (Near End)

system show status command shows that DSL link is not up

remote console command requests a remote console session on 3088 (Far End)

Message informs us that the 3088 (Far End) did not respond and a remote

console session was not opened

system show status command shows that the DSL link state is success

remote console command requests a remote console session on 3088 (Far End)

Message informs us that we are now connected to the 3088 (Far End) console

We can now enter commands on the remote console

Figure 17. Opening a typical remote console session

How to Disconnect

The remote console session ends under any of the following conditions:

•The user enters the command logout

•A timeout period of 5 minutes elapses since the user has entered a command to the console.

•The DSL link drops.

Introduction 47