Model 3088A Series Getting Started Guide2 • Configuration
Remote Console
Provided that there is a DSL link to a second 3088A, a user may login to the first 3088A’s console and enter the remote console command to access the second 3088A’s console. Using this remote console feature, the user can configure and query the status of the second 3088A from a remote location. When the user is finished with the remote console, the logout command can be used to return to the local console.
Example Command Line Interface Session
3088A/K Command Shell |
|
Password: |
|
3088A> system show config |
|
clocking |
|
clock mode: | |
dsl timeslots: | 31 |
system |
|
circuit id: | Patton Model 3088A |
interface |
|
timeslot map: | fffffffe |
line type: | |
line coding: | hdb3 |
line build out: | 75ohm |
rx equalizer: | inactive |
pass alarms: | inactive |
pass framing: | inactive |
g.shdsl |
|
annex: | b |
mode: | cpe |
dsl test modes |
|
loopback: | off |
pattern: | off |
3088A> dsl show status |
|
configuration: |
|
dsl mode: | cpe |
dsl timeslots: | 31 |
annex: | b |
status: |
|
actual rate: | 0 |
loss of signal: | signal found |
noise margin: | 0 |
sync state: | out of sync |
link state: | idle |
test modes: |
|
loopback: | off |
pattern: | off |
errors: | 0 |
error counters: |
|
crc: | 0 |
losw: | 0 |
3088A> system set help |
|
Usage: system set <options>
Introduction | 31 |
