Model 3088A Series Getting Started Guide

2 • Configuration

 

 

Ethernet Management Port

The 3088A offers a 10/100 Ethernet port for configuration and management via Telnet sessions. Because the Ethernet port is configured as MDI, a crossover Ethernet cable is required when connecting directly from a local PC or laptop. The Ethernet interface default IP address is 192.168.200.1.

Through the Ethernet management port, the following variables can be configured:

Password: The password used to login to the console.

Circuit ID: The circuit ID communicated to other units via EOC. EOC (Embedded Operations Channel) is an out-of-band channel specified in the G.991.2 standard for SHDSL. We use standard EOC messages for our remote loopback. The 3088A also supports proprietary EOC messages that allow a 3096RC to con- figure it.

Clock Mode: The following options are available:

-Internal: The internal oscillator in the 3088A provides the clock to both the serial/E1 and DSL interfaces.

-Network: The E1 interface provides the clock for the DSL interface (E1 only).

-External: The serial interface provides the clock for the DSL interface (RS-232, V.35, X.21). X.21 can only be set to DCE if DTE signal element timing is provided to pins 7/14. Otherwise, it must be set to DTE.

-Receive Recover: The 3088A recovers the clock from the DSL interface and provides it to the serial/ E1 interface.

Data Rate: Both the serial/E1 and DSL data rates are set by specifying the number of 64k timeslots.

Pass Framing: For E1, the entire TS0 time slot is passed. When E1 is configured for CAS (Multiframe), the entire TS0 time slot and all of TS16 are both passed.

Pass Alarms: When Passed Framing is enabled, the alarms are always passed, even if Pass Alarms is disabled. When Passed Framing is disabled, you can pass alarms by enabling Pass Alarms.

Rx Equalizer: This can be enabled to remove distortion introduced in the E1 cable.

Line Type: The following framing formats are available:

-E1-Unframed: G.703 Clear Channel

-E1-Fractional: G.703/G.704 fractional.

-E1-CRC: Includes CRC multiframe.

-E1-Multiframe: Includes channel associated signalling (CAS).

-E1-CRC & Multiframe: Includes CRC and CAS multiframe.

Line Code: The following line codes are available:

-AMI: Alternate Mark Inversion.

-HDB3: High Density Bipolar 3 (E1 only).

Line Build Out: The following line build outs are available:

-Pulse-75 (E1 only)

-Pulse-120 (E1 only)

Introduction

27

Page 27
Image 27
Patton electronic 3088A manual Ethernet Management Port

3088A specifications

The Patton Electronics 3088A is a highly versatile and robust device designed to facilitate seamless communications over long distances using various transmission mediums. This model exemplifies the pinnacle of technology in the realm of serial-to-Ethernet devices, serving a multitude of applications in modern networking environments.

One of the standout features of the 3088A is its ability to convert RS-232, RS-422, and RS-485 serial signals into Ethernet TCP/IP data packets, allowing for the integration of legacy systems with contemporary Ethernet networks. This feature is crucial for businesses looking to modernize their infrastructure without discarding existing equipment that operates on serial protocols.

The 3088A boasts an impressive transmission range, which makes it suitable for both industrial and commercial applications. It supports data rates of up to 115.2 Kbps, ensuring that data can be transmitted quickly and efficiently. Additionally, with a built-in web server and a user-friendly interface, configuration and management become straightforward tasks, reducing the complexity often associated with network setups.

Another vital feature of the 3088A is its compatibility with various communication protocols, including TCP, UDP, and ARP. This flexibility ensures that it can be integrated into a wide range of network configurations, catering to specific application requirements, from simple point-to-point communication to complex networking setups.

The device also incorporates advanced security features, such as support for secure socket layer (SSL) connections, to safeguard data transmission against unauthorized access and potential threats. This is particularly important in environments where sensitive information is being transmitted, providing peace of mind for organizations concerned about data integrity and security.

Furthermore, the Patton 3088A is designed with durability in mind. It features a compact and rugged enclosure suitable for deployment in harsh environments, making it ideal for field operations and various industrial applications. The device supports wide power input ranges, ensuring operational stability regardless of fluctuating power conditions.

In summary, the Patton Electronics 3088A stands out as a reliable and efficient solution for those seeking to bridge the gap between serial and Ethernet communications. Its high-speed data transmission capabilities, extensive compatibility with various protocols, enhanced security features, and rugged design make it an essential tool for modern networking needs, enabling businesses to evolve while maximizing their existing technologies.