Eclipse - Fujitsu Ten CD4000 manual Using the Area Shot mode, Switching between guidance points

Various Settings

CAUTION

•Modes may not be changed if guidance data has not been imported properly.

•Do not look at the screen while driving.

Using the AREA SHOT mode

By manually switching between guidance points, both previous and next guidance points can be confirmed during guidance. Intersection street names and the direction of turns are shown on the display in text and with arrows.

Switching between guidance points

After passing each location described in the guidance, it is necessary to switch manually to the next guidance screen. The previous screen can also be accessed manually and confirmed.

1	Press the [ ] or [ ] button to
	switch between guidance points.
	[	] button:
		Switches to the next guidance point.
	[	] button:
		Switches to the previous guidance
		point.

Re-scrolling through text information

Text information including intersection street names and turn directions can be scrolled across the screen. A maximum of 9 characters can be displayed on a single screen. Excess characters are scrolled on the display. When scrolling is complete, the first nine characters are once more displayed on the screen. To re-scroll perform the following operation:

1 Press the [DISP] button.

Guidance information can be re- scrolled.

Changing AREA SHOT screens

In the AREA SHOT mode, the audio screen can be accessed.

1 Press the [RTN] button.

Pressing the button repeatedly allows you to switch back and forth between the AREA SHOT screen and the Audio screen.

● Note ●

The distance between a previous and next turn intersections is displayed on the screen in miles (“mi”) for US model and in kilometers (“km”) for Australia model.

34